収納ベッド セミダブル・グランド【横開き】【Pratipue】【マルチラススーパースプリングマットレス付】ダークブラウン 国産跳ね上げ収納ベッド【Pratipue】プラティーク【代引不可】

【2020年製 新品】 COMETIC [C4026] END TOP SET GASKET ガスケット コメティック-その他

【2020年製 新品】 COMETIC [C4026] END TOP SET GASKET ガスケット コメティック-その他



■商品番号
C4026

■商品概要
DISPLACEMENT:748cc
MADE IN THE U.S.A.:Yes
SPECIFIC APPLICATION:Yes
STYLE:OEM Replacement
TYPE:Top End Gasket Kit


■適合車種
▼YAMAHA
MOUNTAIN MAX 700 1998 - 2002
SX700R 2000 - 2001
V-MAX 700 1999 - 2000
V-MAX 700 DELUXE 1999 - 2000
V-MAX 700 SX 1997 - 1999
V-MAX 700 XT 1998
V-MAX 700 XTC 1998
V-MAX 700 XTC DELUXE 1998
VENTURE 700 1998 - 2004

■詳細説明
・Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
・Materials may vary depending on what is correct and engineered for specified application
・Each PART # contains the proper amount of gaskets for one application
・Made in the U.S.A.
CRANKSHAFT SEAL KITS
・High-quality, domestically made oil seals that are sold in a set containing both crankshaft seals per application
EXHAUST GASKET KITS
・Sold as a set
・4-stroke applications utilize a double-sided Viton? rubber-coated stainless steel gasket providing precise, high-temperature sealing capabilities in all conditions
・Exhaust gasket kits are made for extreme temperatures, utilizing a steel-tanged outer layer that bites into the Armor-400 inner layer (heat-resistant to 1,800 degrees Fahrenheit), providing ultimate strength from blow-outs or push-outs created by over-torqued situations
INTAKE GASKET KITS
・AFM does not require gasket sealers or retorquing
・Intake gasket kits are made using either a .020” thick aramid fiber material or an AFM material that is comprised of a compounded nitrile synthetic rubber bonded to an aluminum core with an 85% recovery rate while maintaining strong torque retention
・Intake gasket kits are designed to resist pushing out from excess torque being applied and are designed for long life
EXHAUST POWER VALVE KITS
・Exhaust power valve kits are made from either .020” thick aramid fiber or an AFM coated aluminum core gasket assembly with superior strength and ease of use
COMPLETE AND TOP END KITS
・4-stroke head gaskets are made to perform on todays highest-output 4-stroke naturally aspirated and boosted machines, utilizing a multi-layered steel design with the outer layers being embossed and coated with a Viton rubber coating; these head gaskets are designed to meet the demands of todays high-horsepower, high-cylinder-pressure engines
・Top End Kits contain every gasket, sealing washer, O-ring and oil seal needed to seal from the base gasket upwards
・Complete kits contain every gasket, sealing washer, O-ring and oil seal needed to completely seal one engine
・MLS head gaskets promote an even torque load across the gasket sealing surface, providing less bore distortion and better piston ring seal for more power


■注意点
※取り扱い説明書は英語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。

【セット買いがお得♪6個セット】【□】簡単便利個食ギフト R-30

お知らせ

ハクバ アルミケース ZX25A